automatic continuous PU sandwich panel roller frequency conversion
high pressure PU foaming machine
Ø Electrical industry roll forming machine
A. 1. Electric cabinet pillar roll forming machine
2. Trench type cable tray roll forming machine
3. Echelon type cable tray roll forming machine
4. Tray type cable tray roll froming machine
B. 1. Bottom plate of stereo garage roll forming machine
2. Rim of stereo garage roll forming machine
ØSteel structure roll forming machine
A. Decking floor roll forming machine
B. Glazed tile roll forming machine
C. Roll forming machine for wall and roof panel
D. C,Z purlin roll forming machine
Double belt conveyor
Double belt conveyor is mainly used for foaming, hardening and
ripening and shaping of core material of sandwich panel being laminated.
nProduct features:
• Total length of the machine could do36 meters, compared with
present production line; the productivity of the new one is
increased 20%.
•Durable: the belt plates are made with heat treated alloy steel.
•SIMENS servo motor and the speed reducer made in Italy will be used
together to control the speed and the foaming time to guarantee the
quality of the panels..
•Fast conversion: Hanging type side sealing system with a separate
chain could be converted by one person only; width and thickness
could be adjusted within a specified range.
•Convenient control: side seal system could be controlled
conveniently as the space between the sealing system and belt
plates is reasonable enough to be accessed.
The lifting hydraulic cylinder of Double-belt laminating machine is
equipped with synchroniaedvalve to ensure the lifting of the upper belt is at the same level and
the frame of the machine won’t be deformed.
Main Technical Specifications for Sandwich Panel Roll Forming
Machine
Sandwich Panel Spec.
pu rolling shutter machine price , roller shutter door machine ,
rolling shutter strip making machine
Introduction of Rolling Shutter Door Roll Forming Machine, Roller
Shutter Door Roll Forming Machine:
The line consists of decoiler, sheet guiding equipment, roll
forming section, cutter, supporter, hydraulic system, control
system. The roller shutter which made by this machine have neat
external appearance, even ripples, high utilization and strong
strength.
Description:
We design the new model which can joint two shutters without
traditional clips. This solution not only save the cost for buying
a door accessory, but also speed up the door construction. It can
be designed to produce any profile which according to customers’
requirements. Customers can select to add the in-line punching
holes device or not. Whole production line is driven by hydraulic
system and controlled by PLC with touch screen.
We are not only offer customers a wonderful machine for making, but
also the abundant experience, precision making, stable automatic
manufacture by hydraulic power, hi-tech control system, and our
enthusiasm.
Specifications:
1. Thickness of Forming Sheet: 0.6 ~ 1.2 mm.
2. Forming Speed: 12 ~ 16 M/min.
3. Roll Shaft Diameter: 40 mm Dia.
4. Hydraulic Motor: 7.5 HP ~ 10 HP
5. Roll stands: 10 ~ 12sets of roll in SK2-hard chrome coated.
6. Attached with cooling equipment.
7. Complete with uncoiler, hydraulic cutting device and including
run-out table.
8. This machine is controlled by computer system with touch screen.
Features:
Professional designing for manufactures shutter steel.
Automatically continually manufactures high quality product with
PLC.
Easy operation: Directly Input the data on the touch screen.
Customers decide the profile of products.
Saving time and cost owing to high speed running with hydraulic
system.
One year warranty.
Composition of the equipment:
Cold Roll Forming Machine (1 set)
Manual Type Uncoiler ( 1set)
Rear-Cutter (1 set)
Pre-Cutter (Option)
Coil Car (Option)
Product Stacker (Option)
Safety Guide (Option) – emergency stop wire, PVC cover…etc
| No. | main parameter of roll forming machine |
| 1 | Suitable to process: | Color steel plate or galvanized steel sheet |
| 2 | Width of the plate: | 1250mm |
| 3 | Pass: | 13passes |
| 4 | Frame: | 300 H steel |
| 5 | Middle plate: | 16mm |
| 6 | Roller material: | 45# steel |
| 7 | Diameter of the roller: | 80mm |
| 8 | ChainChain wheel: | 1.2inch |
| 9 | Power: | 5.5+3kw |
| 10 | Thickness of the plate: | 0.2-0.8mm |
| 11 | Productivity: | 8-12m/min |
| 12 | Dimension: | 8m *1.4m*1.25m |
| 13 | Material of cutting | Cr12 |
| 14 | Roll forming electric tension | 380V 3phase 50HZ or as the customer's requirements |
| 15 | Used | roof and wall panel |
Features (rock wool sandwich panel):
1) Rock wool is non-combustible material, so the rock wool panel
has good fire resisting proper
The test shows the temperature of the panel fire-proof is as high
as 10001°C
2) Roof and Wall panel thickness 100 REI 120
3) Roof and Wall panel thickness 80 REI 60
4) Roof and Wall panel thickness 50 REI 30
5) The roof and wall panels, thickness 50-80-100mm, were classified
0/1 for reaction to fire.
(Materials are assigned a class from 0 to 5, the higher the class,
the higher the degree of combustion)
6) Rock wool panel achieves a notable reduction in air borne sound
transfer
particularly when specifying a perforated liner.The impact of rain
and hail on
the metal sheet, a problem on most standard constructions is
greatly reduced
when adopting CX-RW panels.
The CX-RW panel in thicknesses of 50-100mm
with 100kg/m3 rock wool fibre insulation has achieved results of
RW=29-30dB 100kg/m3
Continuous sandwich panel production line
- PU sandwich panel line
- Mineral wool sandwich panel line
- PF sandwich panel line
