High Strength Roofing PU Cold Sheeting Sandwich panel Roll Forming
Machine
PU sandwich panel line integrate mechanism, chemical, electrical
controlling, hydraulic controlling, pneumatic and temperature and
the procedure of production includes uncoiling, film covering,
cutting, roll forming, pre-heating, foaming, solidification, panel
cutting, stacking and transferring, packing. The sandwich panel
production line was produced and developed by our company and won a
number of technology patents. Wuxi shenghong has successfully
filled in the blank of the PU sandwich panel line in China and has
awarded as a leading manufacturer in building machinery industry.
The PU sandwich panel made from the sandwich panel roll forming
machine is produced with foaming at working site. There is a
special device injecting the foaming material between the upper and
lower metal sheet. And then the material will be sent to double
crawler belt. The chemosynthesis and solidification are both
finished inside the double crawler belt. Cutting is in accordance
with the length set previously. The sandwich panel roll forming
machine has non-stop cutting device and the cutter will be moved
along with the panel. The working process of sandwich panel roll
forming machine consists of uncoiling, film covering, cutting, roll
forming, pre-heating, foaming, solidification, panel cutting,
stacking, transferring and packing.
Main Technical Specifications for Sandwich Panel Roll Forming
Machine
Sandwich Panel Spec.
Min. cutting length--------------------------3 meters
Max. Stacking length--------------------------15m
Panel width--------------------------1000mm (according to profile
requirement)
Panel thickness:
Thickness of flat panel---------------40, 50, 60, 70, 80, 90, 100,
150mm
Thickness of corrugated sandwich panel-----------50, 60, 70, 80,
90, 100, 150mm(exclude corrugated sandwich panel)
| No. | main parameter of roll forming machine |
| 1 | Suitable to process: | Color steel plate or galvanized steel sheet |
| 2 | Width of the plate: | 1250mm |
| 3 | Pass: | 13passes |
| 4 | Frame: | 300 H steel |
| 5 | Middle plate: | 16mm |
| 6 | Roller material: | 45# steel |
| 7 | Diameter of the roller: | 80mm |
| 8 | ChainChain wheel: | 1.2inch |
| 9 | Power: | 5.5+3kw |
| 10 | Thickness of the plate: | 0.2-0.8mm |
| 11 | Productivity: | 8-12m/min |
| 12 | Dimension: | 8m *1.4m*1.25m |
| 13 | Material of cutting | Cr12 |
| 14 | Roll forming electric tension | 380V 3phase 50HZ or as the customer's requirements |
| 15 | Used | roof and wall panel |
Features (rock wool sandwich panel):
1) Rock wool is non-combustible material, so the rock wool panel
has good fire resisting proper
The test shows the temperature of the panel fire-proof is as high
as 10001°C
2) Roof and Wall panel thickness 100 REI 120
3) Roof and Wall panel thickness 80 REI 60
4) Roof and Wall panel thickness 50 REI 30
5) The roof and wall panels, thickness 50-80-100mm, were classified
0/1 for reaction to fire.
(Materials are assigned a class from 0 to 5, the higher the class,
the higher the degree of combustion)
6) Rock wool panel achieves a notable reduction in air borne sound
transfer
particularly when specifying a perforated liner.The impact of rain
and hail on
the metal sheet, a problem on most standard constructions is
greatly reduced
when adopting CX-RW panels.
The CX-RW panel in thicknesses of 50-100mm
with 100kg/m3 rock wool fibre insulation has achieved results of
RW=29-30dB 100kg/m3
ervice
We provide the technician support for whole life ,Meanwhile , if any parts go broken and not artificial damage ,we
aill send you a new one for free.When need the technician to go to
abroad,we will arrange the technician .But the buyer should take
all the cost ,including Visa,Roundtrip ticket,Suitable
Accommodation and pay the service fee to the techinician 50$ per
day.
