Automatic PU Sandwich Panel Machine 24m belt Panel Roll Forming Machine

PU Sandwich Production Line

Hydraulic Uncoiler----Color Steel Forming Machine------ Gluing System------ Main Composite Machine-------Automatic Tracking Cutting System -------- Elevator System------ Controlling System

Technical Parameters

Color Steel Forming Part

1) roller station: 14

2) material of roller:45#steel

diameter of roller:Φ70mm

3) rolling mould: two sets

blade: two sets

material of blade:Cr12

4) main motor power:4.0Kw(Tai Wan Delta frequency converter or as per customers requirement)

5) forming speed:0-8m/min

6) sprocket: P-25.4

7) thickness: less than 1mm

7) dimension:12*1.5*0.8m

Gluing System

1) glue pump power:1.5KW

2) two Sets

3) glue pump : 2Sets

Working Principle

Polyurethane resin,curing agent,and foaming agent are delivered to high-speed mixing head in certain proportion through metering pump,evenly mixed and continuously coat on basal plate by coating head’s reciprocating motion,then enter into double crawler machine with plate,foam and cure between the top and bottom layer of heated double crawler machine;when it is cured and shaped,the trimming device on both sides will get it into accurate size.Finally,the sizing following tracing cutting machine cut off it as per preset length.

Machine parameters:

Wuxi Hengruiyang Technology Co., Ltd is a manufacturer of roll forming machine. At present, our products have been exported all over the world, and maintained good cooperative relations with customers.