Polyurethane PU Sandwiching Roll Forming Machine PU Sandwich Panel Production Line Sandwich Panel Equipment Continuous

PU sandwich panel line integrate mechanism, chemical, electrical controlling, hydraulic controlling, pneumatic and temperature and the procedure of production includes uncoiling, film covering, cutting, roll forming, pre-heating, foaming, solidification, panel cutting, stacking and transferring, packing. The sandwich panel production line was produced and developed by our company and won a number of technology patents. Wuxi shenghong has successfully filled in the blank of the PU sandwich panel line in China and has awarded as a leading manufacturer in building machinery industry.

The PU sandwich panel made from the sandwich panel roll forming machine is produced with foaming at working site. There is a special device injecting the foaming material between the upper and lower metal sheet. And then the material will be sent to double crawler belt. The chemosynthesis and solidification are both finished inside the double crawler belt. Cutting is in accordance with the length set previously. The sandwich panel roll forming machine has non-stop cutting device and the cutter will be moved along with the panel. The working process of sandwich panel roll forming machine consists of uncoiling, film covering, cutting, roll forming, pre-heating, foaming, solidification, panel cutting, stacking, transferring and packing.

Machine Parameter

Steel Sheet Spec.

Thickness--------------------------0.4-0.7mm (material must be level, no corrugation and distortion)
Yield strength of material--------------------------≤235MPa
Max. Width of material--------------------------1250 mm
Max. coil weight--------------------------5 T
Inner Dia. of coil--------------------------Φ508, Φ610 mm
Foaming material--------------------------141B foaming agent
PU forming density--------------------------40～45 kg/m3

Whole Line Spec.

Working speed--------------------------3-7m/min (adjustable)
Total length--------------------------about 120m
Working height--------------------------1200mm (height of panel coming out)
Pressure for foaming--------------------------150-200 bar
Effective length of double belt conveyor--------------------------21m
Control mode--------------------------imported PLC system((Siemens/Mitsubishi)
Total power--------------------------about 220Kw
Power required--------------------------380V/3phase/50Hz
Control voltage--------------------------24V / 110V/ 220v
Air pressure--------------------------0.7Mpa (for buyer to prepare)

Wuxi Hengruiyang Technology Co., Ltd is a manufacturer of roll forming machine. At present, our products have been exported all over the world, and maintained good cooperative relations with customers.